WHS Hardware Failure

As of recently my WHS Server has gone through a major Hardware failure, and luckily WHS seems to be handling it to a degree, but there is only so much it can take. My setup is one Back Plane inside the Lian Li case with two Sans Digital Tower Raids each holding up to 8 Hard Drives each connected through eSata with a PCI-e interface.

This setup works perfectly except that the Sans Digital Tower Raid failed before and once I replaced it, it all worked perfectly again. Its rare that two hard drives fail at the same time, and its very rare that three hard drives fail at the same time but in this case its 5 hard drives which are becoming inaccessible meaning its hardware failure at the interface level and not the hard drives again. I’m looking for an alternative solution because this has gotten ridiculous.

Results of inaccessible Hard Drives:

  • Usually I get 40 to 70 MB/s on my network when streaming shows or transfering files but due to the system unable to find files or trying to search for them it drops down to 0.58 to 4 MB/s and sometimes stopping to think. It finishes the job but you get stopped sometimes
  • Files go missing due to the missing hard drives which makes it difficult to continue watch any episodes, you have file duplication running but because of this mass Hard Drive failure so files are not accessible so you can watch a few episodes and can’t see the rest of the show